Carpenters in
Riverview, FL
8 carpenters listed in Riverview
Carpenters in Riverview at a glance
- 8 carpenters are listed in Riverview, FL on Ratedeed.
- 4 of the 4 listings shown here include a phone number you can call directly.
- Listings cover 4 ZIP codes in and around Riverview: 33569, 33578, 33579, 33619.
Carpenters elsewhere in Florida: Miami (143), Tampa (119), Jacksonville (110), Orlando (97), Sarasota (76), Naples (60)
Homes and carpenters in Riverview: the local numbers
Housing in Riverview
- Riverview has about 41,914 homes (housing units).
- The typical (median) home was built in 2006, 18 years newer than the Florida median of 1988.
- 7% of homes were built before 1980 and 1% before 1960; 38% were built in 2010 or later.
- The median value of an owner-occupied home is $384,200.
- 76% of occupied homes are owner-occupied and 24% are rented.
- 74% of homes are single-family detached houses.
- The most common heating fuel is electricity (89% of homes), followed by natural gas from a utility (7%).
- The median home has 6.2 rooms.
- Median gross rent is $2,002 a month.
- Riverview's housing is newer than most of the country; the typical U.S. home was built in 1980.
- Homeownership is higher than the U.S. rate of 65%.
- Detached single-family houses are the norm, at 74% of homes.
Source: U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates (Riverview, FL).
Carpenters workforce in the Tampa-St. Petersburg-Clearwater, FL area
- Median hourly wage
- $25.06
- People employed
- 6,010
- In the Tampa-St. Petersburg-Clearwater, FL metro area, carpenters earned a median of $25.06 an hour ($52,130 a year) in May 2025, and the middle 80% earned $17.88–$33.63.
- About 6,010 people work in this occupation in the metro area.
- These are what workers earn, not what carpenters charge: a contractor's hourly rate also covers insurance, licensing, vehicles, overhead and profit.
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (Carpenters).
Climate in Riverview and what it means for carpenters
- The average temperature in Riverview is 73°F; summer afternoons average 90°F and winter nights 53°F.
- It gets about 46 inches of precipitation a year.
- There are about 1 nights a year at or below freezing and about 73 days at 90°F or hotter.
- It is a cooling-dominated climate: about 3,611 cooling degree days a year against 539 heating degree days.
Source: NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, Tampa International Airport station USW00012842 (23.7 km from the city centre).
Top Carpenters in Riverview
Listings include contact details and service areas. Check licensing with your state board before hiring.
Showing 4 of 8. See every listing in Riverview
More carpenters elsewhere in Florida
Listed in other Florida cities, not in Riverview.
Licensing and consumer protection in Florida
Check that any carpenter you hire is licensed and insured before you sign a contract or pay a deposit.
Who regulates this trade
Florida Department of Business and Professional Regulation (DBPR) — Construction Industry Licensing Board
Verify a licence on the official register →Insurance and workers' compensation
$300,000 general liability minimum for state-licensed contractors. Workers' compensation is mandatory. Contractors must also demonstrate financial stability through a credit report or surety bond.
Mechanic's lien protection
Florida requires a Notice to Owner to be delivered to the property owner before work begins or within 45 days of first furnishing labor or materials. Mechanics liens must be filed within 90 days of the last work performed or the last delivery of materials. The lien expires automatically after 1 year unless a lawsuit to enforce is filed. Florida's Construction Lien Law is strictly enforced, and homeowners should always collect lien waivers from their contractor and all subcontractors before making payments.
What catches homeowners out in Florida
Florida requires contractors to be either state-licensed (certified) or county-licensed (registered) depending on their trade. A "Certified Contractor" can work anywhere in Florida, while a "Registered Contractor" can only work in the counties where they hold a license. Verify both the license type and status at myfloridalicense.com. For hurricane-prone areas, only contractors with the appropriate building code training should be hired for structural, roofing, or window installation work. Florida also requires contractors to include their license number on all contracts and advertisements.
Frequently Asked Questions
Common questions about hiring contractors
How much do carpenters earn in the Riverview area?
In the Tampa-St. Petersburg-Clearwater, FL metro area, carpenters earned a median of $25.06 an hour ($52,130 a year) in May 2025, and the middle 80% earned $17.88–$33.63. About 6,010 people work in this occupation in the metro area. These are what workers earn, not what carpenters charge: a contractor's hourly rate also covers insurance, licensing, vehicles, overhead and profit. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025.
How old are homes in Riverview?
The typical home in Riverview was built in 2006, and 7% of homes were built before 1980. The median owner-occupied home is worth $384,200. Source: U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates.
How much do carpenters charge in Riverview?
Carpenter rates in Riverview typically range from $45–$95 per hour, with finish carpenters and custom cabinetmakers charging $70–$120/hr. Project costs vary by scope: trim and crown molding installations average $500–$2,000, framing repairs run $800–$3,500, and custom built-in cabinetry ranges from $1,500 to $6,000+. Request quotes from multiple Riverview carpenters on Ratedeed to compare estimates.
Do I need a permit for carpentry work in Riverview?
Cosmetic woodwork, interior trim, and cabinet installation do not require permits in Riverview, FL. However, structural carpentry — including load-bearing wall removal, room additions, framing alterations, and deck construction — requires a municipal permit. Contact the Riverview building department for permit requirements.
What is the difference between finish carpentry and rough carpentry?
Rough carpentry focuses on the structural backbone of a building (wall framing, roof trusses, floor joists, subflooring). Finish carpentry involves decorative, visible woodwork after walls and drywall are completed (baseboards, crown molding, door casing, stairs, and cabinetry). Many carpenters in Riverview specialize in one area, while general carpenters handle both.
How do I find a skilled carpenter near Riverview?
On Ratedeed, you can browse carpenters serving Riverview and view reviews from local homeowners. Ask to see a portfolio of recent carpentry work, check proof of liability insurance, and obtain a written estimate outlining material costs and labor before starting your project.
Top Cities for Carpenters in Florida
Explore carpenters in the most popular Florida cities
Other Categories in Riverview
Explore more contractor services in Riverview
Ready to Hire a Carpenter in Riverview?
Request quotes from carpenters in Riverview, FL. No obligation.
Get Free QuotesBrowse Nearby Services in Florida
- Home
- ›Contractors
- ›Florida
- ›Riverview
- ›Carpenters